Quick Answer
If you're looking to find the fuse panel for the alarm system in your 2014 Dodge Charger, it's usually located inside the vehicle, to the left of the steering wheel, behind the dashboard. You'll need to open a little panel to access it.
Generally, the alarm system fuse can be found in the interior fuse box. The specific fuse that controls the alarm might be labeled as "Alarm" or "Security". If you have the owner's manual, it should provide a diagram or list detailing which fuses correspond to which functions.
- Location: Inside the vehicle, near steering wheel.
- Label: Look for "Alarm" or "Security" on the diagram.
Briefly, check the interior fuse box, usually on the driver’s side. The key is identifying the correct fuse based on the diagram provided either in the manual or sometimes on the cover of the fuse box itself. Remember, these fuses are vital to managing different electrical elements of your car safely.
Table Of Contents
Let's talk about the fuse panel for the alarm system in a 2014 Dodge Charger. If your car alarm is not functioning, it might be due to a blown fuse, and knowing where to find the fuse panel and how to understand the fuse diagram is crucial.
Fuse Box Location
In the 2014 Dodge Charger, there are two main fuse boxes (or panels) you should be aware of:
- Interior Fuse Box: This is located on the passenger side of the car, somewhat underneath the dashboard. To access it, you might have to open the passenger door and look towards the side panel of the dash. It's conveniently placed to access fuses related to the car's internal electronics.
- Under the Hood Fuse Box: As the name implies, this fuse box is located in the engine compartment. When you open the hood, look on the driver's side near the front. This is the main fuse panel that controls many critical functions of the vehicle, including some external lights and the alarm system.
Fuse Diagram and Tables
Each fuse box has a cover which ideally has a diagram printed on it showing the location and function of each fuse. Here’s a breakdown of the key fuses related to the alarm system:
| Fuse Position | Fuse Rating | Function |
|---|---|---|
| F32 | 10A | Alarm Module |
| F46 | 20A | Central Locking and Alarm Sirens |
When inspecting the fuses, ensure the car is turned off, and preferably the key is out of the ignition. Carefully pull the fuses related to the alarm system, as indicated above, and check if the thin wire inside is broken. A broken wire usually means a blown fuse, and it must be replaced with a fuse of the same amp rating.
Conclusion
Understanding your 2014 Dodge Charger's fuse panel can help solve issues related to your alarm system quickly. With the fuse location, diagram, and ratings mentioned above, you can replace a necessary fuse and potentially get your car alarm working again. Just remember to always replace a fuse with one that has the same amperage to avoid any electrical issues.
Video Answers
Dodge Charger - FUSE BOX LOCATIONS (2011 - 2021)
Fuse box location and diagrams: Dodge Charger (2011-2019)
DODGE CHARGER ALARM FUSE LOCATION REPLACEMENT
Dodge Charger alarm and horn issue
Dodge Charger AC Fuse and Relay 2011 - 2014
Dodge Challenger (2008-2014) Fuse Box Diagrams