Quick Answer
For your 2014 Dodge Avenger, the fuse panel related to the car alarm is typically located in two places: inside the car and under the hood. The fuse box inside the car is usually on the driver's side, beneath the dashboard. This is where you'll check for any issues with the interior components.
Meanwhile, the fuse box under the hood can be found near the front on the driver's side, often covered by a black plastic lid. It's crucial for the car's major electrical systems, including anything connected to the car alarm system.
Here are some steps to locate and check the fuses:
- Look for the label on the fuse box cover to identify the car alarm fuse.
- Use a fuse puller to remove the fuse carefully.
- Inspect the fuse to see if it’s blown (the metal wire inside will be broken).
- Replace it with a fuse of the same amperage if needed.
Ensure every connection is secure, and if the alarm issue persists, further inspection might be required.
Table Of Contents
If you’re having trouble with the car alarm in your 2014 Dodge Avenger, it could be a problem with the fuse. Understanding where the fuse panel is located and how to identify the correct fuse is crucial. Let’s dive in to help you sort this out!
Fuse Box Location
In the 2014 Dodge Avenger, the fuse box, also known as the power distribution center, is located in the engine compartment. To access it, pop your hood and look at the left side (driver’s side) near the battery. You’ll see a black box labeled "Fuses." This is the fuse box.
Fuse Diagram
When you open the fuse box, you’ll notice a diagram on the cover. This diagram is a layout of all the fuses, showing you which fuse corresponds to each electrical component in the car.
Finding the Car Alarm Fuse
The car alarm system is tied to the Integrated Power Module (IPM) in this vehicle. In the 2014 Dodge Avenger, the fuse for the car alarm is often linked with other components such as the power locks and interior lights. Locate the fuse labeled either as "Security" or part of the "BCM" (Body Control Module) system.
| Fuse Number | AMP Rating | Protected Circuit |
|---|---|---|
| 10 | 20A | Security System / BCM |
| 11 | 15A | Power Door Locks |
| 12 | 10A | Interior Lights |
Before removing or replacing a fuse, make sure the vehicle is off to avoid any electrical shorts or damages. Remove the fuse using a fuse puller or a pair of needle-nose pliers. Hold it up to the light to see if the filament inside is broken. If it is, you'll need to replace it with one of the same AMP rating.
Replacing the Fuse
- Turn off your car and disconnect the battery for safety.
- Locate the damaged fuse using the fuse diagram as a reference.
- Use a fuse puller to gently extract the fuse.
- Insert the new fuse of the same rating and ensure it’s securely in place.
- Reconnect the battery and test the car alarm system to see if it’s working properly.
That’s it! Hopefully, this helps you fix the problem with your car alarm. Remember, keeping a few spare fuses in your glove box can save you a trip to the store next time!
Video Answers
Fuse box location and diagrams: Dodge Avenger (2008-2014)
Chrysler 200 & Dodge Avenger (2011-2014) Fuse Box Diagrams
2012 -2014 Dodge Avenger Fuse Box Diagram
Top 5 Problems Dodge Avenger Sedan 2nd Generation 2008-2014
Horn location on 2014 Dodge Avenger
2013 Chrysler 200 Horn Circuit - No Fuses or Relays