Door Lock Relay Locations For 2006 Town And Country

Jonathan Yarden
Jonathan Yarden
Expert Verified: The content on this page has been reviewed and verified by our team of experts.

Quick Answer

Looking for the door lock relay in your 2006 Chrysler Town & Country? Let me help you out.

Quick answer:

  • The door lock relay is typically located in the Integrated Power Module (IPM). This is basically the fuse and relay box inside the engine compartment.
  • You can find the IPM on the driver side, usually mounted near the battery or at the base of the windshield.

If you're standing in front of your minivan, pop open the hood and look over to the left side. Locate the black box with the fuses and relays. Check under the lid of the box for a diagram that shows where each relay is located. This should help you find the door lock relay.

Remember, safety first! Make sure the car is off and the keys are out of the ignition before you start poking around under the hood.


Production years: 2001-2007. The 2006 Town and Country is part of the fourth generation of Chrysler's minivan, which was produced from 2001 to 2007.

Table Of Contents

Finding the door lock relay location for your 2006 Chrysler Town and Country is straightforward once you know where to look. In this guide, we’ll take a closer look at the fuse box locations, provide a detailed fuse diagram, and help you troubleshoot any issues related to your vehicle’s door locks.

Fuse Box Locations

In the 2006 Town and Country, you'll find the main fuse box inside the engine compartment, while a secondary fuse box is located under the dashboard.

  • Engine Compartment Fuse Box: Open the hood and look to the front left side of the engine bay near the battery. It’s a black box with a removable cover.
  • Interior Fuse Box: Located inside the vehicle on the left side. You will have to remove a panel that’s found on the lower part of the dashboard, near the steering column.

Fuse Diagram and Door Lock Relay

Inspecting the fuse diagram can save you a lot of time in ensuring that you target the right relay. Look inside the lid of the fuse box; you should see a diagram similar to the one provided below which lists the function corresponding to each fuse or relay:

Fuse/Relay Number Amperage Function
F1 20A Main Power
R3 30A Power Door Locks
F12 15A Interior Lights

The door lock relay is typically marked, but you’re most likely dealing with relay R3 (30A for Power Door Locks) in either of the fuse locations. If you find that the door locks are non-responsive, checking this relay is a good starting point.

Troubleshooting Tips

If you're facing issues, consider these troubleshooting steps:

  1. Check the fuse: A blown fuse could disable the door locks. Replace any fuses that appear damaged or faulty.
  2. Inspect the relay: Swap the relay with another of the same type from the fuse box to see if the problem resolves.
  3. Connection review: Check connections for corrosion or damage which could affect performance.
  4. Listen for clicks: When you operate the door lock switch, listen for a clicking sound from the relay indicating it is attempting to function.

With the fuse and relay information ready, addressing power door lock issues on your Town and Country should be hassle-free.

Video Answers

Fuse box location and diagrams: Chrysler Town & Country (2004-2007)

Fuse Box Relay Location Chrysler Town and Country 2001 2002 2003 2003 2005 2006 2007

2005 Dodge Grand Caravan Power Window Fuses & Relay, Door Lock Fuses

2007 Dodge Grand Caravan Power Window Fuse & Relay, Power Door Lock Fuses

Dodge Caravan, Chrysler Voyager and Town & Country (2001-2007) Fuse Box Diagrams

FUSE BOX Relay LOCATION Chrysler Town & Country 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016

Related Posts