Quick Answer
For a 1997 Chevy S10, if your tail lights aren't working, it's quite possibly due to a blown fuse. Fuses help protect your vehicle's electrical system from overloads.
Quick Answer:
- Location: The tail light fuse is located in the fuse panel, which is typically found on the driver’s side dashboard.
- Fuse Type: You'll be looking for a 20-amp fuse in most cases, but it's always good to check your fuse panel cover or the owner's manual for the exact type.
- Check: Look at the fuse to see if the metal strip inside is broken. If it is, the fuse needs replacing.
Simply replace the blown fuse with one of the same amperage. If the new fuse blows again, there might be an underlying electrical problem that needs looking into.
Table Of Contents
If you're trying to sort out issues with the tail light fuse for your 1997 Chevy S10, you're in the right spot. Here's how you can find the fuse box, interpret the fuse diagram, and replace the right fuse to get your tail lights working again.
Fuse Box Location
On the 1997 Chevy S10, the fuse box is typically located on the side of the dashboard, on the driver's side. You'll need to open the driver's side door and locate the panel at the end of the dashboard. There’s usually a small handle that you can pull to detach the cover of the fuse box.
Understanding the Fuse Diagram
Once you've exposed the fuse box, you'll see various fuses lined up. To identify which fuse corresponds to the tail lights, you can reference the fuse diagram. This is often embedded inside the fuse box cover or within your vehicle's manual. If that's missing, here's a quick guide:
| Fuse Number | Fuse Rating (Amps) | Component Protected |
|---|---|---|
| 15 | 10A | Tail Lights |
| 16 | 15A | Parking Lights |
| 18 | 20A | Stop/Turn Signal |
Replacing the Tail Light Fuse
- Turn off the Vehicle: Ensure your Chevy S10 is parked and the ignition is turned off. This prevents any electrical shocks or shorts.
- Locate the Tail Light Fuse: As per the table, you’re looking for fuse number 15, which is rated at 10 amps.
- Remove the Fuse: Using a fuse puller or a pair of needle-nose pliers, gently pull the fuse out of its socket. If the metal strip inside the fuse is broken, it needs to be replaced.
- Replace the Fuse: Get a new fuse with the same ampere rating (10A in this case) and plug it into the same socket.
- Test the Tail Lights: Start your vehicle and test the tail lights to ensure they are working properly.
That's all there is to it! With these steps, you should have your tail lights up and running in no time. Happy driving!
Video Answers
Fuse box location and diagrams: Chevrolet S-10 (1994-2004)
Chevy s-10 brake light problem
1994 Chevrolet S10 SS No Brake Light's Fix
1994-2004 Chevrolet S10 Fuse Box Location
Chevy s-10 back up lights not working
Fuse box location and diagrams: Chevrolet Blazer (1996-2005)